AFM Safecoat WaterShield
Safecoat WaterShield is a clear, versatile, controlled penetration water repelling sealer which provides an invisible barrier against water and resists oils, grease and similar liquids. It is fast drying, has excellent adhesion, and is easy to apply. In addition to sealing and providing a protective barrier against water migration, it helps to harden, dust proof and control efflorescence in masonry surfaces. It is not toxic, non-flammable, lead free, formaldehyde free, and does not contain surface contaminating silicons, making it a desirable coating for interior or exterior use. May be used on painted surfaces and may be painted over when dry. Dries clear and does not discolor.
WaterShield Spec Sheet, WaterShield MSDS
AFM Safecoat Penetrating WaterStop
Safecoat Penetrating WaterStop improves water resistance and repellancy in a wide variety of surfaces, including brick walls, concrete foundations, stucco, stone and most unglazed tile. Because Safecoat Penetrating WaterStop low odor and not toxic, it is ideal for use indoors instead of a typical high solvent content sealer; yet, it is durable enough for use outdoors. It is partiuclarly useful as a periodic maintenance coat for surfaces originally treated with Safecoat WaterShield.
Penetrating WaterStop Spec Sheet, Penetrating WaterStop MSDS
AFM Safecoat Hard Seal
Safecoat Hard Seal is a multi-use, clear gloss sealer especially formulated to provide mar resistance to both low and high porosity surfaces. Because it forms a continuous membrane when applied properly it is particularly effective at sealing in any pollution or toxic chemical compounds outgassing from the surface to which it is applied.
Hard Seal Spec Sheet, Hard Seal MSDS
AFM Safecoat MexeSeal
Safecoat MexeSeal is a low odor, waterbased, medium gloss clear sealer. It is suitable for use on porous interior tile or masonry surfaces where oil and water repellency are desired. It is ideal for long term protection against food, oil and water stains on residential or commercial floors. Safecoat MexeSeal is non-hazardous and non-flammable – a total replacement for high solvent content systems.
MexeSeal Spec Sheet, MexeSeal MSDS
AFM Safecoat Safe Seal
Safecoat Safe Seal is a multi-use, waterbased, low gloss sealer for highly porous surfaces such as particle board, plywood, processed wood and porous concrete. Used primarily to reduce toxic outgassing: in particular, it is highly effective at sealing in formaldehyde outgassing from processed wood such as plywood, particle board and pressed wood. Safecoat Safe Seal is virtually odorless on application and odorless once cured.
Safe Seal Spec Sheet, Safe Seal MSDS
AFM Safecoat Grout Sealer
Safecoat Grout Sealer is a clear, moisture resistant sealer for porous tile grout and other cementitious surfaces. It actually reacts with and becomes a part of the grout, increasing water resistance and minimizing the penetration of liquids, helping to prevent staining and giving a wearable, washable surface. Like all Safecoat products, it is as safe and not toxic as possible, formaldehyde free and virtually odorless, giving off no offensive chemical fumes. Dries clear without discoloration.
Grout Sealer Spec Sheet, Grout Sealer MSDS
AFM Safecoat MetalCoat Metal Primer
AFM MetalCoat Acrylic Metal Primer is a thermoplastic acrylic emulsion primer fortified with rust inhibiting pigments. Designed for use on non-ferrous metal, iron, steel, aluminum, galvanized and masonry. It is not recommended for copper. Provides a tough, flexible film, producing outstanding corrosion resistance and excellent adhesion. May be used on interior or exterior, including marine atmospheres. Very low odor and low VOC, it is one of the least toxic metal primers available, formulated without the heavy metals and other hazardous ingredients commonly used.
SCS CERTIFIED – LEED QUALIFIED
MetalCoat Metal Primer Spec Sheet, MetalCoat Metal Primer MSDS
AFM Safecoat Carpet Seal
SafeChoice Carpet Seal (formerly SafeChoice Carpet Guard) is a unique sealer designed to prevent the outgassing of harmful chemicals used in carpet backing. These chemicals include such known carcinogens as formaldehyde, toluene, benzene, xylene and styrene. Carpet Seal is odor-free and, when properly applied, effectively blocks outgassing for up to five cleanings or one year.
Carpet Seal Spec Sheet, Carpet Seal MSDS
AFM Safecoat Lock Out
SafeChoice Lock Out is designed to perform two functions: first, to seal in the outgassing of harmful chemicals found in carpet fibers, and second to help repel dirt and stains.
Lock Out Spec Sheet, Lock Out MSDS
AFM Safecoat Caulking Compound
Safecoat Caulking Compound is a not-toxic, water-based, elastic emulsion type caulking compound designed to replace oil caulk and putty for windows, cracks and general maintenance work. It will not dry out or crack and does not release any solvents or obnoxious odors. Safecoat Caulking Compound provides a water resistant, flexible, easy to install, non sag sealant with excellent initial and permanent adhesion. As a ready-to-use, pigmented elastomer, Safecoat Caulking Compound has thixotropic properties which enable the application to be made with ease with no stringiness and yet maintains flexibility and toughness with rapid drying characteristics. It may be applied to a variety of substrates and has high durability. Resin rich formula affords maximum bond strength.
Caulking Compound Spec Sheet, Caulking Compound MSDS
AFM Safecoat Almighty Adhesive
Safecoat Almighty Adhesive is a solvent-free, environmentally safe, non-toxic, high-performance construction adhesive for use in a wide variety of applications. It does not off-gas and has almost no odor, so is safe for use in enclosed or poorly ventilated spaces. It exceeds all VOC and environmental regulations. Almighty Adhesive provides 500 PSI shear strength, more than enough grip for most applications.
AFM Safecoat 3 in 1 Adhesive
Safecoat 3 in 1 Adhesive is a low odor, not toxic, water-based adhesive designed for hard composition wall and floor tiles and carpeting.
3 in 1 Adhesive Spec Sheet, 3 in 1 Adhesive MSDS
Bostik TKO Flooring Adhesive (New and Improved)
Bostik’s TKO is a one-part, trowel-applied, moisture-cure urethane; this advanced, scientifically-formulated adhesive does NOT contain water. Once cured, TKO is waterproof and is not adversely affected by exposure to moisture or water; its superior properties provide a tough, flexible, tenacious bond to a variety of surfaces. TKO’s elastomeric characteristics allow the adhesive to move with the wood as it expands and contracts over the life of the floor.
A technical innovation in moisture-cure urethane adhesives that offers the following:
• Easy to spread
• Holds a better ridge
• Cleans up faster when wet than most urethane adhesives
• Contains Bostik’s BlockadeTM Antimicrobial Protection
• 0-Solvent
• 0-VOC
Bostik TKO Technical Info, Bostik TKO MSDS, Bostik TKO LEED Info
Eurobond-European Certified D3 Tongue and Groove Glue by Cal-Flor
• Specially designed, high strength, cross-linking formula.
• The only American manufactured adhesive certified to meet the European D3 standards for flooring!
• More effective against water damage than other glues.
• One bottle covers 125-200 square feet.
• Flexible when dry resulting in stronger, longer lasting bonds.
Available in 16oz bottle
Cal-Flor Adhesive Remover
FilmFree Spot Remover and Surface Cleaner
• Quickly remove sticky substances and stains from all hard surfaces!
• Ready to use 12 oz pump spray bottle.
• Removes build up of adhesives and other sticky substances.
• Quick and easy to use.
• Special formula provides protective shield
• Wax free!
• Works on pre-finished wood and laminate floors as well as other non-porous surfaces.
• Made in the USA
Cal-Flor Adhesive Remover MSDS
Titebond® 741 Ultimate Wood Flooring Adhesive
Titebond® 741 Ultimate Wood Flooring Adhesive is a one-part, trowel applied, moisture-cure adhesive. Once cured, the product is water resistant and is not adversely affected by exposure to moisture or water; its superior properties provide a tough, flexible, tenacious bond to a variety of surfaces. The product’s elastomeric characteristics allow the adhesive to move with the wood as it expands and contracts over the life of the floor.
Titebond 741 Ultimate has unparalleled green grab and strength development. Titebond 741 Ultimate may be used to secure solid wood flooring, bamboo, cork, and engineered hardwood flooring. This adhesive can also be used to install plywood as well as, ceramic tile, marble, and stone inlays for residential and commercial applications.
Ultimate Wood Flooring Adhesive MSDS
TiteBond® GREENchoice Heavy Duty Construction Adhesive
GREENchoice Heavy Duty Construction Adhesive offers superior interior and exterior strength. Its all-purpose versatility is ideal for all common building materials. It provides a strong grab, fills gaps and irregularities and will remain permanently flexible. GREENchoice Heavy Duty is a VOC-compliant formula containing no ozone depleting chemicals, making it safer for you and the environment. Unlike solvent-based adhesives, it is nonflammable, emits no harmful fumes and cleans up with water.
Heavy Duty Constrution Adhesive MSDS
TiteBond® Greenchoice Professional Cove Base Adhesive
GREENchoice Professional Cove Base Adhesive is designed for the quick and easy installation of rubber and vinyl cove bases. Its fast, strong grab holds materials firmly in place and eliminates sagging. It offers excellent adhesion to drywall, plaster, paint, wallpaper, paneling and ceramic tile. GREENchoice Professional Cove Base is a VOC-compliant formula containing no ozone-depleting chemicals, making it safer for you and the environment. Unlike solvent-based adhesives, it is nonflammable, emits no harmful fumes and cleans up with water.
